Ghost 2 Immobiliser Problems

The ghost 2 immobiliser near me 2 immobiliser, designed to guard cars against key cloning or hacking, is a discrete device that can be installed without damaging your vehicle. It prevents you from starting your car unless you enter the correct sequence of keys in your vehicle. It is similar to a mobile password.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by blocking the engine from starting unless it receives the correct PIN code. This is done with no modifications to the vehicle and is completely undetectable to thieves. The unit communicates with the ECU via the CAN data bus to disable the vehicle. This is the same system that used by car manufacturers for a long time. However, thieves cannot bypass it with a new key or key relay technology, like they could with factory fitted systems.

Ghost is compatible with all vehicles with an engine, including cars, vans, motorhomes and caravans as well as bikes. The same system can be used on electric cars. It's a great alternative to wheel clamps and steering wheel locks.

When the Ghost is armed it will block all the buttons in your vehicle and stop the ignition from starting without a PIN code having been entered first. This can be done via the Android or Apple mobile app or by entering the code using your key fob. If a wrong code is entered the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great deterrent. if the vehicle can't be started, the burglar will then move on to a different area of.

The Ghost is tiny weatherproof device that can be concealed in the most difficult to access parts of your car. Installation takes between 20 and 30 minutes for each vehicle. It is also very simple to remove should you choose to change your vehicle or give it away for valet parking or service. It is an TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system, and is recognized by certain insurance companies. It also comes with an emergency Pin Code override and features a Service/Valet Mode that can be activated by pressing a button on the app or using your key fob.

Disarm

Unlike the mechanical anti-theft devices, which are able to be removed and reinstalled, ghost immobilisers are concealed and are integrated into the car. Even if they were to be found, thieves would not be able to start the vehicle. They are virtually impossible to hack or bypass. This is because ghost immobilisers prevent key hacking, signal jamming and device spoofing - techniques that are used frequently by thieves to get into vehicles that have standard immobilisers.

An immobiliser operates by sending an electronic code to the ECU (electronic control unit). If the wrong code is sent and the vehicle is not started as the engine will not fire up. Although it is possible to disable the ghost immobiliser using software, this is very laborious and time-consuming. The software must be installed and operated by a authorized installer.

The Ghost immobiliser is a tiny device that is part of the wiring loom of the vehicle and is invisible to the naked eye after it has been installed. It won't show up on diagnostic systems, there are no LED indicators and it does not connect to the engine via the OBD port. It communicates silently through the CAN data loop.

The system will block the vehicle from starting unless it is able to receive a user-defined PIN code sequence. The PIN code is entered via buttons on the steering wheel or door panels, or on the centre console. This is a safer method of protecting your vehicle as it does not require keys or remote control.

In addition to this Ghost offers the option of a service mode that can be activated using the application on your mobile phone. This lets you hand over your keys to someone else for service or valet parking, without the need to enter the disarm sequence.

If your Ghost is in service mode or not you should not attempt to remove the system by yourself since it could impact the engine and cause damage. It is recommended to contact a TASSA certified installer who will be able to remove the system in a safe and secure manner. Our most recent GHOST immobilisers have a specific fingerprint QR sticker that is hidden in different parts of your vehicle. They are linked to our security register. In the event that the device is removed and then sold on the blackmarket it will be able to trace the original owner.

Anti-Hijack

Ghost Immobiliser 2 has a highly effective anti-hijack function. This system works like smart keys and is one of the most secure methods to protect your vehicle from thieves. The Ghost system will automatically turn on the hazard light and stall the car's engine when the ignition is turned on and the vehicle is stationary. This gives the driver or passengers enough time to press a hidden security button (depending on the vehicle) before the system is activated and the engine is once again allowed to start.

The Ghost system, unlike many competitors, utilizes a timer and controller unit which shuts down the valve that shuts off fuel after a set period of time. This is even if the ignition remains on. The delay time must be sufficient to allow the owner of the vehicle to get away, and be a sufficient distance from the vehicle that is stalled before the system is activated.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it comes with an additional level of security that prevents common hacking methods employed to gain access to modern cars such as relay attacks key range extending, key range hacking and ECU swapping. This is due to the fact that the Ghost system communicates silently and does not emit any signals that can be detected by thieves using RF scanning or code grabbing technology.

The Ghost system features an option for service or valet mode that allows your vehicle to be re-started and driven without the need for PIN code. This is great if you park your car and only require it to be left for a short time, such as to open the garage door or put groceries in the boot. The system will end the service mode based on speed and time or by the simple input of a PIN code process. This gives you complete assurance that only you are able to drive your vehicle!

Keyless Entry

With the growing trend in contactless car theft Many people are considering additional security options. This is especially applicable to those who have put in time or money in personalizing their vehicles and own expensive or rare vehicles. An immobiliser add-on can be a cost-effective way to prevent this type of theft as it can stop your vehicle from starting until the proper pin code is entered on your key fob.

Immobilisers are made to work with various vehicle circuits, including ones that control starter motors and fuel pumps. They also can shut the car alarm to draw attention to and frighten away any potential thieves.

These devices communicate with the engine control unit (ECU) via the CAN data circuit, and they stop a burglar trying to get around it by installing a new ECU or using the key programmer. These immobilisers are put in place discreetly and leave no marks in your vehicle. They are also unnoticeable by hi-tech thieves' tools.

In contrast to other systems that require a specific application, or a tag to be worn on the driver's person the Ghost immobiliser can only be disarmed by pressing a sequence of the existing electronic buttons on your steering wheel, door panel, and the centre console, which allows you to choose a custom pin sequence. The pin can be changed as frequently as you like, meaning it is as secure as a credit card, and is even more difficult to break due to it requiring up to 20 presses.

Ghost also comes with a Valet/Service mode that allows you to disable it if you are going to hand over your vehicle to valet parking or service. This allows the system to operate within parameters such as a 30 mph speed limit. The system can be activated using the original key or entry code.

This makes it the most effective and secure aftermarket CAN immobiliser on the market. It is insurance approved by Thatcham as an optional accessory to your vehicle when installed by one of our authorised installers. The Ghost 2 immobiliser is also equipped with six QR fingerprint labels as well as an ISR contact card containing your unique QR code as well as an emergency code that is secure that can be kept in the purse or wallet of your car.