Why You Should Hire a Glazier to Repair Double Glazing Seals

When window replacement seals fail, they could result in higher energy bills and foggy glass. Employing a professional to repair the damaged seals can prevent the issue from getting worse.

The window seals are crucial to the insulation offered by double glazing. They are easy to repair and can save you money in the end.

Remove the Old Seal

The seals could break for various reasons. They can be damaged by poor double glazing repair installation, or they may break over time due to wear and tear. While it's not possible to completely prevent a window seal from breaking, taking a few precautions can ensure that the issue is less likely to occur. Avoiding cleaning your windows with power for instance, will reduce the risk of damage caused by high water pressure. You should also check that the window manufacturer doesn't recommend the use of reflective window films on their windows because they could damage the window seal.

The most frequent indication of a damaged seal in double-glazed windows is the presence of condensation between two panes. This occurs when the vacuum-sealed inert gas such as argon or Krypton, that was positioned between the two panes glass has disappeared. If this happens, the window will not be in a position to keep cold and moisture out of your home.

Fortunately, repairing a faulty window seal is not difficult. A new wedge gasket can be purchased at any hardware store. It should be easy to install in your uPVC window. If you are worried that you'll be unable to install the new seal correctly spray water on the window's frame to aid in lubricating it.

Before you begin installing the new seal, it is important to make sure there aren't any obstructions in the grooves of your window frame. This can include melting uPVC pieces that are often leftover from previous repairs. You can use a chisel or a hammer to remove these areas prior to you start the repair. This will ensure that your new rubber seal is a perfect fit into the window frame.

While it is possible to fix a broken uPVC window seal yourself however, it is better to leave the job to the professionals. A professional glazier has the tools and skills to complete the task quickly and efficiently, with minimal risk of damage to your uPVC windows.

Clean the Surface

Double glazing windows can reduce noise pollution if they are installed and maintained correctly. However, a window seal that is damaged can let in moisture and air that could cause numerous issues like condensation. The condensation inside a glass pane can be ugly, but it also causes mould to grow and damage the frame. Repairs by a professional are needed. Other indicators of a failing seal include a draft which can be uncomfortable and costly to heat, or a distortion in the glass, which could alter light transmission and affect the view.

Double-glazed windows can be easily repaired particularly if you spot the issue early. While it is possible to complete the job yourself, a professional is usually recommended as they have the expertise and access to high-quality products that will last for a long time.

To get the job started it is essential to get rid of any existing silicone sealant, which can be done by carefully scraping away the old material with a sharp blade. After removing any sealant that was previously used the surface should be thoroughly cleaned. When the surface is clean, the next step is to seal the window.

Before sealing the unit again before sealing it, turn the bottom of the pane upside down, so that the glass face that was inside the sealed unit is facing upwards. The surface should be thoroughly cleaned using dry, clean cloth.

Drilling holes into windows with double glazing is usually not a good idea, but when it comes to saving money and preventing the necessity of a professional call out, a small hole in the seal could be used to insert an insulating packet that will absorb any moisture that may be accumulating between the two glass panes. The hole can be cleaned using rubbing alcohol (isopropyl) to stop the growth of mould.

Double-glazed windows are made to last, but they do sometimes break down. Many people need a double glazing repair. The most common indications that seals are failing is drafts, condensation and a distorted look between the glass panes.

Apply for a New Seal

Window seals are crucial for maintaining a tight and energy-efficient glass-to frame connection, whether you have recently moved into your new home or recently installed double-glazed windows. As time passes, seals may be damaged due to the weather or other external elements. It's important to replace damaged seals as soon as possible. This will stop water from getting in between the glass panes which could cause condensation, a decrease in energy efficiency, or even water damage to your property.

It's best to choose the day that has a lower chance of rain when you're working. You will be working with the window open and don't need a lot of rainwater to enter your home. This could cause damage to the new seals. Wear eye protection if you're using power tools to take off old window seals. It's easy to get debris or dust into your eyes.

It is essential to thoroughly clean the surface after taking off the old seal prior to applying the new one. Using a utility knife or putty knife, clean all residues off the surface and then apply a new coat of silicone caulking to reseal the gap. Make sure you apply an globule of the caulking to the outside of the frame as this will help make an airtight and waterproof seal around the glass.

Paint the exterior of the frames of your windows to shield them from the elements. This is a great way to maintain the integrity of the window, particularly in hot temperatures.

You can reseal windows on your own, but in the event of a major issue, it is recommended to call an expert company that is specialized in window sealing. You can be assured that the new seals have been properly installed, making sure your windows remain energy efficient and secure.

Allow the Seal to heal

Double-glazed windows are a great choice for homeowners because they protect against the weather and keep heat generated by your heating systems inside. They also prevent sunlight from escaping. It can only do so by ensuring that the window seal is correctly installed. A damaged seal could cause mist and condensation to form between the glass panes. It can also lead to energy loss, draughts, and even security issues. It is therefore important to address a damaged seal as soon as you can in order to avoid damage to the window as well as your home.

You can test your window seal by smelling for draughts or cold around the frame's corners. If you can feel it, then the gasket has sunk and is no longer making a seal. You may also look for misting or condensation between the glass panes of your double-glazed windows. Both of these problems are caused by a breach in the double glazed window seal which allows moisture into the area and reduces its insulation qualities.

There are kits for resealing the double glazing seals available if you are a DIY-er. These kits typically require drilling a small hole into the window replacement, and then cleaning it using a magnet. They then put in drying pellets that disappear, and then fill the hole with clear concrete. However, while these kits do have a good track record of providing quick results, they do tend to need doing more often than professionally-installed windows and they don't always provide a lasting solution.

It is important to let the sealant dry completely before using it, whether you repaired your window seals yourself or hired a professional. It may take some days or a few weeks to cure the sealant, so you must wait until that time to open the window. A window that has been sealed will need to be treated with care and attention and it's a good idea to lay an old towel or duvet down on your work surface to shield it from scratches and stains.