Repairs to uPVC Windows

uPVC is a great option for window repairs modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation, you will need to find some plastic spacers that aid the new pane in being able to fit correctly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall onto the fabric rather than on the floor, where they could be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your property until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap between the window and the door is substantial, you may want to use a security screen that also has windows. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could be affected by a variety of issues, including sliding. A sagging uPVC window can cause issues with light, draughts, and even security. It is crucial to act when you discover that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window to access the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window repair near me to check the fit after you've moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in the right place.

If you aren't able to move the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and then perform an experiment to ensure that it fits. The corner joints of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may have to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in an ease. They can be replaced by any competent DIYer and are usually done within a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should be opened.

The issue could be caused by opening the window incorrectly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be more than happy to give you advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also stop corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges can also be disaligned as a result of wear, which can cause an opening where the sash and frame meet. If they're beyond repair, it could be required to realign them. In addition, the interlock could be disaligned. It is located on the hinge's side, and might require to be cleaned. In certain instances it might be necessary to replace these.

These seals can wear down or be damaged over time, allowing air to escape. Installing high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder. These are typically made of fabric filled with some sort of filler and can be placed on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and they may reach a point where it is more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as possible.