Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. However If you have double-pane windows that are secured by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this situation you'll need source some plastic spacers that aid the new pane in being able to fit properly into the window frame.

If you are going to attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from entering the home until a professional can come out and repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap between the window repairs near me and the door is significant, you may prefer an alarm system that includes an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of problems including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows so you can reach the frame. After that, using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, tighten the screws to ensure they stay in position.

If you cannot reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. The majority of the time it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fit. The corner joints of the sash must be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open in a breeze it could be hinges that are at the fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's easy to change a window hinge but it's much simpler if you have someone to help you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular manner or because of improper installation in the factory. Sending us photos through our website can often solve the issue. We are happy to provide suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also lower the risk of a window sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become unbalanced due to wear, which can cause gaps where the sash and frame meet. If they're beyond repair, it might be required to realign them. Second, the interlock can be misaligned. It is located on the hinge side and could require to be cleaned. In certain instances it might be necessary to replace them.

The next common cause of draughts is the window seals. They are prone to wear or Window Repairs damaged over time and will allow air to escape through these gaps. Installing high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and lessen the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows eventually get worn out and it may be more cost-effective to simply replace them instead of fixing them. So, if you are experiencing problems with your upvc windows, it is always best to seek professional assistance immediately.