Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, repairmywindowsanddoors durable and repairmywindowsanddoors easy to maintain. As opposed to aluminium and timber they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could be affected by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts, and repairmywindowsanddoors even security. It is crucial to act as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll need open the window to get to the frame. After that, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and test it for an appropriate fit. If you are happy with the size of the window, you can tighten screws to secure them in place.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also loosen up. This is typically caused by screws that have loosened over time, but it can be due to the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. First, you'll need to shut the window and perform a test fitting. The corner joints of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's crucial to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is a fairly simple fix that can be done by any DIY expert. Depending on how serious the problem is, the old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes do not have debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leak originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze, it may be hinges at the fault. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is essentially a very simple process but it can be easier if you have someone to help hold the frame up.

Verify that the uPVC hinges open and close in the correct direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or due to poor installation at the factory. Sending us a picture via our website will often resolve the problem. We are more than happy to offer assistance.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. First, the hinges because of wear and tear, can become misaligned, this can cause an opening to appear between the sash and the frame. These can be easily repaired by giving them a good clean, but when they're beyond repair, it might be necessary to get them re-aligned or replaced. In addition, the interlock could also become disaligned. This happens on the hinge's side and may need to be cleaned. In some instances it is possible to replace these.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the upvc window repair New Addington with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Another, and most effective ways to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some sort of filler and can be placed on top of your windowsill. They can help block out cold air and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and there may come the point when it's more economical to replace them than fix them. So, if you are experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as you can.