Is It Time For Replacement Double Glazed Windows?

Replacing windows can increase the efficiency of your home. These modern designs feature uPVC or aluminum frames that help to trap heat in your home.

If you have noticed signs of condensation, draughts, or leaks in your window frame, it's time to consider replacement double glazing. Find a local FENSA approved installer to start.

1. Excessive Condensation

Double glazing can help you maintain the heat inside your home and help lower your energy bills. However, it's important to be aware of the indications that your windows may require replacement in the event of excessive condensation. This can lead to a myriad of issues, including mildew and mould.

Condensation occurs when warm humid air comes in contact with a cold surface. You may have observed this in your home when you've woken up to find that your glasses have gotten an oily coating on the surface, or you could have seen it in the outdoors when the temperature has dropped below dew point and moisture forms on the glass of the window.

This is usually due to an increase in humidity inside when the outside temperature is dropping. It can also be caused by moisture on the inside of windows if there's not enough ventilation, or if your house is too hot and the window is open while you shower or cooking.

The plaster exposed near the window are usually subject to external condensation. This isn't as much of a problem as it sounds because the warmth of the sun and the movement of air tends to dry it out quickly. It's worthwhile to look into specialist glass that will prevent the formation of condensation. For example Pilkington's ActivTM Self-Cleaning Glass has a hydrophilic surface that repels moisture and minimises condensation.

If you notice internal condensation, if it's between your window panes this indicates that the seal has been damaged and the window requires replacing. It's also possible that it's allowing heat to escape, so it's important to get the issue looked into by an expert.

2. Wear and tear signs

Your windows don't talk, but they do try to send you signals that something isn't right. If you're seeing signs such as cracks, draughts, and condensation, it might be the time to think about replacing your double glazing.

Modern uPVC windows are designed to provide insulation and lower your energy bills. They keep warm air in winter and cool air out in summer, thereby saving you money. However windows that are energy efficient, like double-glazed windows have short lifespan and may need replacing.

The most common indication that double-glazed windows are worn out is condensation. It usually happens between the two glass surfaces and can be a sign that the seal has failed, replacement double glazed windows or that your windows aren't as energy efficient as they once were.

A second sign is that your windows are sweating on the inside. This happens when the temperature of the air in your home drops below the dew point. This causes water vapour to condense on the surface of the window panes. This could also be caused by a leak or damage to the seal.

It is recommended to hire an expert to replace your windows if they exhibit signs of wear. This is a job that shouldn't be done as a DIY task, as it can be risky and could result in broken glass. Instead, hire a company that specializes in the installation of double-glazed windows, since they have the proper tools and safety equipment needed to complete the task quickly and efficiently. In addition, they'll be capable of providing you with advice about the different types of double glazed windows available and the best ones for your home.

3. Unsealed Windows

Double-glazed windows are made of two panes with a spacer between them. This creates an insulation barrier that stops your warm air from venting out and cold air from outside coming in. Double glazed windows are more energy efficient than single pane windows and can reduce your energy bills significantly by keeping your house warmer for longer.

In a sealed glass window the space between the two panes is filled with inert gases such as argon xenon and Krypton. These gases reduce the heat transfer within the window. This makes it more energy efficient and lowers your heating costs. But with time, the seal between the glass can fail and let air in, which will diminish its insulating properties.

Foggy windows are also an indication that the seal on your window is in a state of failure and allowing moisture be able to seep through. The fog will usually disappear when the weather changes, but you may still feel the draughts.

It can also allow insects like centipedes, insects, spiders, and mosquitoes to enter your home. It also allows dirt and pollen in which can cause allergies inside your home. A solid window seal will also minimize noise from the street or other sources.

If you're not sure if your seal is damaged check it as soon as you can. A professional will be able to inform you how to fix it and also replace the damaged IGU unit. They will usually disassemble the window's sash and then take out the old IGU unit and replace it with an entirely new one. If the IGU unit is covered under warranty the contractor or manufacturer will pay for the cost. In the event that it is not, you'll need to cover your windows until a replacement windows prices can be installed.

4. Faulty Windows

Double glazed windows are an excellent choice to reduce energy costs because they let the sun to shine in and also block out noise from outside and keep your home insulated. When they don't work correctly however, it's a big problem that can result in drafts and moisture inside the house. It is essential to have windows repaired or replaced as soon as possible to prevent leaks and damage from occurring.

The most obvious sign that double-glazed windows aren't sealing correctly is the emergence of condensation. The space between two panes develops an unpleasant fog that is not removed from either side. The reason for this is that the seal around the panes has failed and allows gas or air such as argon or Krypton to escape, creating a moist atmosphere within your home.

Another sign that your windows are no longer working as they should is a rise in your utility bills. Your windows are designed to block warm air from exiting and cold air from entering therefore any increase in your utility bills is a great indicator that it's time for replacement double glazing.

Faulty windows are usually caused by poor installation. Installing a window requires skill, precision and training. Homeowners shouldn't attempt to do the job themselves. Poorly installed windows can lead to mold growth, water leaks and even leaks. Improper cleaning and care of windows can also lead to premature failure. This is often caused by using harsh chemicals and power washers which damage the frames, glass and seals. Installing windows from an established company is the best option to avoid these issues and ensure that they last for a long time to come.

5. More Energy Bills

It is important to make use of energy efficiently in order to avoid wasting it. The windows of a home are an important factor in the overall efficiency of a house. So if your energy bills are getting more expensive It could be time to have your double glazing examined and replaced.

Draughts and leaks in old windows can increase your energy bills dramatically. They let cold air into a property, and can even cause heat loss. By converting windows, and with the latest technology, these issues can be resolved and you can enjoy an energy-efficient home all year.

In the winter months, double glazed windows help to keep your home warm by securing warm air and keeping cold air out. This can reduce your reliance on central heat and make your home more cost-effective.

Double glazing can also be an important factor to consider during warmer months because it stops the heat from accumulating inside of your home. This can reduce your energy bills and impact on the environment.

Retrofit double glazed windows are a great choice for homeowners looking to cut down on their energy bills but don't have the budget for an entire window replacement. The installation process is much quicker and requires less materials as the existing frame and sash stay in place. This also lets the homeowner pick their own style of window and still benefit from the insulation provided by the highest-quality IGU. The new glass can be filled with argon to improve efficiency of energy.