Double Glazing Lock Repairs

Quality locks on your windows and doors will stop burglars from entering your home. Generally, they don't like breaking glass or trying to wiggle through windows that are open.

Certain double glazing owners however, have experienced problems with their door or window lock after installing. Fortunately, these issues can be fixed without having to buy new double glazing.

Broken or Faulty Locks

A locksmith can repair your uPVC window or door lock if it is broken or faulty. They can fix the striker plates, hinges, and locks on your double-glazed. They can also adjust the cylinder in order to correct any misalignment that may cause your handle to operate correctly.

The mechanism may be locked if the key fits in the lock, but it does not turn or become difficult for you to insert. This could be due to dirt or grime getting stuck inside the mechanism. If this is the case, then it may be possible to clean the lock and then lubricate it. Use a dry lubricant like graphite or Teflon, not oil, because oil can attract dirt, and cause it to stick to the inside mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant should work its way into the mechanism and the lock should spin easily.

Loose screws within the lock mechanism are another cause of a faulty lock. They can loosen and fall out, or even break off completely, preventing the lock from being able to function properly. A screwdriver can be used to tighten these screws, however, care must be taken not to over-tighten them since this could cause damage to internal components.

A faulty lock is dangerous for your family and you. This is especially relevant if you have young children. It's possible for them to open the door without knowing, and this can give them access to your home. If you're concerned that this could occur, a professional locksmith can help you secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on both uPVC doors and windows. We can also alter the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always required.

Broken or Faulty Handles

As part of their overall security package many double-glazed windows have a multipoint lock. This is a great option for those concerned with opportunistic thieves looking for ways to gain access to your home. It is also a good idea to ask your locksmith about anti-lift blocks, these can be fitted in addition to the locks already in place and will keep your window locked in a closed position.

Handle locks are usually damaged or fail. They are the first component that criminals will use to force open your window. Fortunately, the good news is that this is one of the easiest parts to Repair My Windows And Doors.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette that is designed to resist forced entry. This security upgrade is offered as an option with new uPVC windows. As an upgrade option, older style handles made of aluminium or uPVC that are no longer used can be upgraded to shoot bolt locking systems.

It is crucial to fix a handle as soon as possible after it has been damaged. The damaged handles could stop the window from closing properly and Repair My Windows And Doors permit drafts to enter. It may be a weakness that opportunistic burglars could exploit, placing your home and belongings at risk of theft.

The process of repairing the malfunctioning mechanism begins by getting access to the window frame and removing the damaged handle. The gearbox can then be accessed to determine the type of gearbox used to open the handle. This will permit to replace the handle that matches the profile and the internal window frame mechanisms.

Once the mechanism has been replaced, the handle can be re-affixed using the original screws but we would recommend replacing them with larger ones as this will give a more secure fit. The final step is to seal the handle with an opaque sealant. This will shield it from further corrosion. After that, your window will be fully operational again, and at a fraction of the cost of replacing the entire window.

Hinges that are Broken or Faulty

If your windows don't close properly, you could be experiencing draughts, an affliction of your home's security and an increased risk of damp or water damage. Broken or defective window hinges are a common issue and can be repaired easily.

If you have a uPVC windows that won't close or open it's likely that the hinges are broken or damaged and need to be replaced. Most window companies will require you to buy an entirely new window unit to fix this simple problem, but we can replace the hinges in order to save you money.

Window hinges can often break due to repeated use or may be weakened due to corrosion over time. In the event of a damaged hinge, it is important to take measures to prevent further damage by being careful not to make the window swing to close or open.

You can locate the appropriate parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all brands of window hinges. Get advice from a professional before purchasing parts that will not fit with your existing hardware. This can result in more damage.

A damaged hinge can be a big issue for your uPVC windows and doors. They can be an important source of noise, and can also allow water to get into your windows.

To resolve this issue, first make sure that the pin barrel on both sides of the hinge is aligned. If it's not, tap the head pin with an hammer to create a small bend in the hinge barrel. This will help keep the pin in place. Then, ask a friend to hold the door while you remove the hinges and hinge screws from both the doorjamb and the door. Replace the hinges with those that are the same size and attach the screws using glue. Finally put the hinges in place using clamps or weights while the glue is drying.

After you have repaired your hinges, you are able to put the door back in place. You can also attach the handle. It is a good idea to replace the screws with the same length of wood dowels as the original screw so that they match up with each one.

Glass that is Broken or damaged

uPVC Windows can become damaged over time, even though they are great at keeping out the cold and retaining warmth. This can be the case with broken or damaged glass, as well as faulty locks. If not taken care of, it can be a costly problem. This can also detract from your home's aesthetics and Repair My Windows And Doors result in a decrease in insulation. It is crucial to repair any damage promptly.

You can repair the crack in your glass by yourself if you have the proper tools and techniques. Be sure that the area around the broken glass is clear of debris, so that pieces of glass do not cause injuries or cause a trip hazard. Then, take any broken pieces and dispose of them in a safe manner. Then, put masking tape over the entire area to prevent pieces of glass from scattering and sticking to your skin when you move them. If you're dealing with a double-pane window it's a good idea prepare the glass before gluing it back in place to ensure that you'll have enough space complete the task.

Before applying the glue clean the surface of the broken frame and the glass with a an unclean, dry cloth. Follow the instructions for application and curing that can differ from product to. Depending on the degree of the crack you may need to secure the glass in place during the curing process with lightweight clamps that are specifically designed to support fragile materials.

After the adhesive has fully set, carefully place the glass into the window frame, ensuring that it is flush with the edge of the frame and that there aren't any gaps between the glass and the window sash. Avoid flexing the glass as you install it again, as this could weaken the seal. This could lead to condensation or water infiltration.

If you have a glass door that's completely shattered or has larger cracks, call a professional glazier like O'Brien(r) to organise an exchange. It's crucial to act fast when you notice broken glass.